欧陆娱乐

NEWS
Product Knowledge
Your current locations:Home > Product Knowledge> 技术支持

Computer room environment humidity is too high

Posted:2016/8/27 23:13:13 Read:1214
  

Room humidity once overweight components or dielectric material is easy to form a water film, as a result causes "conductive path" and flashover, can seriously reduce the reliability of the circuit; And some of the plastic and rubber products, due to the water, will produce deformation and damage.

Usually, all kinds of electrical equipment for its work in computer room environment humidity requirements of control at about 45% - 45% RH was the most suitable. When computer room environment humidity than 65% RH or higher, moist air electrical equipment within the room would be caused by the different degree of damage, affecting its normal operation and safety!

Equipment within the room shoulders on the responsibility of data interchange, storage and transmission, containing a large number of precision instruments and equipment such as servers, switches, routers, disk array, such as equipment, has a higher requirement on indoor environment is; Therefore, in order to ensure the normal running of the room equipment and safety, to scientific and reasonable environment humidity control is necessary! Otherwise, once the room humidity excessive components or dielectric material is easy to form a water film, as a result causes "conductive path" and flashover, can seriously reduce the reliability of the circuit; And some of the plastic and rubber products, due to the water, will produce deformation and damage.

Computer room environment humidity is too high, then what should I do? How to effectively control room humidity? In the room humidity control, equipment room dehumidifier dehumidifier and SEL series air shoulder the very important role, can offer the safe operation of power supply, one of the most suitable humidity environment, completely solve the problem of computer room and wet! Only need to place it in the computer room, unmanned humidity automatic control can be realized, which is one of the most widely used in computer room environment humidity control equipment, and moisture-proof measures.

About computer room environment humidity also has A national standard GB2887-89 computer station site technical conditions stipulated in article 4.4.1.3 boot time room environment humidity standard is: A grade 45% ~ 65% RH, class B 40% ~ 70%, C grade 30% ~ 80% RH; The standard of general communication equipment room shall be reach grade A standard. In the general principles of the communication industry standard room electrostatic protection of VD/T754-95 also has the standard of environmental temperature and humidity: 4.2 environmental requirements of relative humidity between 40% ~ 65% RH.

Computer room environment humidity is higher, the influence and damage to equipment is, the greater the room dehumidifier and SEL series air dehumidification function for equipment safe operation of the computer provides a most suitable humidity environment (between 45% - 45% RH). The need to tell you is:


Previous:Indoor swimming pool also need to use the heat pump dehumidification machine?
Next:"Bad" rain this year is not afraid of tide, the home has a wet purification and drying dehumidifier
Shanghai Shiya Electrical Equipment Co., Ltd. 2015 All rights  
Support:Chuge8
QQ 001
QQ 002
QQ 003
QQ 004

Hotline:
4006855503

欧陆娱乐